Auto Detect Dimm/Pci Clk; Spread Sprctum; Host Cpu/Pci Clock; Cpu Clock Ratio - TMC LI7WM User Manual

Socket 370 810e chipset custom lpx from factor motherboard

Table of Contents

Chapter 6 BIOS and System Setup

Auto Detect DIMM/PCI Clk

The settings for this field are Enabled and Disabled (default).

Spread Spectrum

This field sets the value of the spread spectrum. The default setting is

Disabled. This field is for CE testing use only

The Host CPU/PCI Clock has a default setting of Default which is

either 66/33MHz or 100/33MHz as automatically detected by the

system. The options are as follows: For CPU with 66MHz FSB, the

options are 66/33MHz (Default), 75/37MHz, and 80/40 MHz. For CPU

with 100MHz FSB, options are 100/33MHz (Default), 112/37MHz,

117/39MHz, 129/43MHz, 133/33MHz, 138/46MHz, 140/35MHz,

150/37MHz, 166/41MHz, 180/30MHz, 190/31MHz and 200/33MHz.

NOTE: Overclocking could cause the system not to boot. When this

happens, turn off the computer by pressing the power button

and turn it on again by pressing the Insert key and the power

button simultaneously. Then press the Delete key to enter

BIOS Setup and configure the CPU speed.

The CPU Ratio, also known as the CPU bus speed multiplier, can be

configured as 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, and 8.

The above setup is for Intel 810E chipset use only. For

motherboards with Intel 810 (MI6WBML), the options for Spread

Spectrum and Host CPU/PCI Clock are not available. An extra

option is the CPU Clock/SpreadSpectrum. The setting for the

CPU Clock is 66MHz~150MHz, while the settings for Spread

Spectrum are off and on.

LI7WM User's Manual

Table of Contents

Table of Contents