Chapter 6 BIOS and System Setup
5.1 I/O Connectors
The I/O connectors connect the LI7WM to the most common
peripherals. To attach cables to these connectors, carefully align Pin 1
of the cables to that of the connectors. Refer to Figure 4 for the location
and orientation of the connectors.
Figure 4: Orientation of the I/O Connector
5.2 J1: S-VHS Connector
The J1 S-VHS connector is for the TV-Out feature of the onboard VGA
controller. Below are the pin-out assignments of the connectors.
5.3 J2: RCA Connector
The J2 RCA connector is for the TV-Out feature of the onboard VGA
controller.
22
Pin #
Signal Name
1
Ground
2
Ground
3
Luma Output
4
Chroma Output
LI7WM User's Manual