Chapter 11 Li7Wm And The Databook Case - TMC LI7WM User Manual

Socket 370 810e chipset custom lpx from factor motherboard
Table of Contents

Advertisement

Chapter 11 LI7WM and the Databook Case

This chapter provides a step-by -step guide describing the procedure of
installing the LI7WM motherboard into its databook case. Carefully
read the instructions and follow the procedures one step at a time.
1. Removing top cover.
1-1. Remove the middle upper screw at the back of the case.
1-2. Slightly pull out the two clips on the two sides of the top
cover. Make sure the clips are now 'unlocked' before proceeding
to the next step.
1-3. Pull the top cover towards the back of the case by 2cm.
1-4. Remove the top cover in an upward direction.
Front
Panel
Edge
1-2
LI7WM User's Manual
Chapter 11 LI7WM and the Databook Case
FRONT
1-3
Pull 2cm
Pull up to
remove
cover
1-1 Remove screw
Back Panel
1-4
1-2 Slightly pull
clip on
both
sides
67

Advertisement

Table of Contents
loading

Table of Contents