Ide Primary Master/Slave Udma And Secondary; Onboard Fdd Controller; Onboard Serial/Parallel Port; Uart 2 Mode - TMC TI5VG User Manual

Chapter 6 BIOS Configuration
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
IDE Primary Master/Slave UDMA And Secondary Master/Slave
UDMA
This field allows your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and
Disabled.

Onboard FDD Controller

This option allows you to select the onboard FDD port.

Onboard Serial/Parallel Port

These fields allow you to select the onboard serial and parallel ports and
their addresses. The default value for these ports are:
Serial Port 1 3F8/IRQ4
Serial Port 2 2F8/IRQ3
Parallel Port 378H/IRQ7

UART 2 Mode

This field determines the UART 2 mode in your computer. The options
are Standard, HPSIR, and ASKIR.

Onboard Parallel Mode

This field allows you to determine parallel port mode function.
SPP Normal Printer Port
EPP Enhanced Parallel Port
ECP Extended Capabilities Port
52 TI5VG Pentium VP3 ATX Motherboard User's Manual