Figure 40: Local Area Connection Properties - Windows Vista; Figure 41: Internet Protocol Properties - Windows Vista - Hughes HN9200 User Manual

Computer settings
2. Right-click the Local Area Connection-NIC Card icon, which represents the satellite modem
network connection, and select Properties.
The Local Area Connection-NIC Card Properties dialog appears as shown in
Local Area Connection Properties – Windows Vista
Note: Depending on the computer's security settings, a User Account Control message
may appear, requesting that you confirm the action before proceeding. If you see this
message, click Continue to proceed.
Figure 40: Local Area Connection Properties – Windows Vista
3. Ensure that both Client for Microsoft Networks and Internet Protocol (TCP/IP) are installed
and checked as shown.
4. If NetBEUI is installed and checked, uncheck it or uninstall it.
5. Highlight the appropriate TCP/IP connection. Be careful not to uncheck the checkbox.
6. Click Properties.
The Internet Protocol Properties dialog appears as shown in
Properties – Windows Vista
Figure 41: Internet Protocol Properties – Windows Vista
7. Ensure that both the Obtain an IP address automatically and Obtain DNS server address
automatically options are selected.
on page 57.
on page 57.
HN9200 Satellite Modem User Guide
1038623-0001 Revision B
Appendix A
Figure 40:
Figure 41: Internet Protocol
57