Special Feature; Locking Out; Using Keylock; Using Delay - GRE PSR-216 Owner's Manual

SPECIAL FEATURES

LOCKING OUT

You can scan existing channels faster by locking out chan-
nels that have a continuous transmission.
To lock out a channel while scanning, press L/OUT when
the scanner stops on the channel. To lock out a channel
manually, manually select the channel and press L/OUT un-
til L/O appears on the display.
To remove the lockout from a channel, manually select the
channel and press L/OUT until L/O disappears from the dis-
play.
Note: You can still manually select locked-out channels.
To remove all lockout from a channels as follows:
1. Press MAN.
2. Press and hold CLEAR then press L/OUT. Lo ALL–CL
appears on the display.
3. Press ENT to clear all lock out. If you do not clear lock-
out, press CLEAR.

USING KEYLOCK

After programming your scanner, you can eliminate accidental
program and/or functional changes by locking the keypad.
To turn the keylock on, press and hold
mately 3 seconds, or until the scanner beeps three times
and appears in the display. The only usable keys while
this function is active are
SQUELCH and VOLUME.
To turn the keylock function off, press and hold
approximately 3 seconds until the scanner beeps three times
and disappears in the display.

USING DELAY

Many agencies use a two-way radio system that has a pe-
riod of several seconds between a query and a reply. To avoid
missing a reply, you can program a 2-second delay into any
channel or frequency. When your scanner stops on a chan-
nel or frequency with a programmed delay, DLY appears on
the display and the scanner continues to monitor that fre-
quency for 2 seconds after the transmission stops before
resuming scanning.
18
Page 18
for approxi-
, MAN, SCAN, LIGHT,
for
2004/04/08, 16:50