Store The Frequency In Monitor Memory - GRE PSR-216 Owner's Manual

3. Press the number key of the monitor memory location
you want to hear (1-20).
4. Press MEM again.
STORE THE FREQUENCY IN MONITOR
MEMORY
When the scanner stops on an active frequency while search,
and you want to temporarily save it, press the MEM button
to store it in the monitor memory with the flashing indicator
beneath it.
If you do not want to save the active frequency, press either
< or > to continue the search.
Store the Monitor Memory Frequency in a
Permanent Channel
1. Press PROG. PROG appears on the display.
2. Enter the channel number where you want to store the
monitor frequency, then press PROG.
3. Press MEM. MEM flushes. Use the number key to enter
the monitor memory's number (1-20), then press MEM.
4. Press ENT. The scanner stores the frequency in the se-
lected channel.
5. To move another monitor memory frequency to the next
channel, press PROG and repeat Steps 3 and 4.
Page 17
17
2004/04/08, 16:50