Using The Belt Clip; Connecting An Earphone/Headphones; Connecting An Extension Speaker - GRE PSR-216 Owner's Manual

Warning: Use extreme caution when installing or removing
an outdoor base station antenna. If the antenna starts to fall,
let it go! It could contact overhead power lines, if the an-
tenna touches a power line, contact with the antenna, mast,
cable or guy wires can cause electrocution and death! Call
the power company to remove the antenna. Do not attempt
to do so yourself.

USING THE BELT CLIP

You can use the belt clip for hands-free carrying when you
are on the go. Simply slide the belt clip over your belt or
waistband.
CONNECTING AN EARPHONE/
HEADPHONES
For private listening, you can plug an earphone or mono
headphones with a 3.5 mm plug into the PHONE jack on top
of your scanner. This disconnects the internal speaker.
Caution: To protect your hearing, follow these guidelines
when you use an earphone or headphones:
• Do not listen at extremely high volume levels. Extended
high-volume listening can lead to permanent hearing loss.
• Once you set the volume, do not increase it. Over time,
your ears adapt to the volume level, so a volume level
that does not cause discomfort might still damage your
hearing.
Warning: Do not use an earphone or headphones with your
scanner when operating a motor vehicle or riding a bicycle,
in or near traffic. Doing so can create a traffic hazard and
could be illegal in some areas.

CONNECTING AN EXTENSION SPEAKER

In a noisy area, an amplified speaker might provide more
comfortable listening.
Plug the speaker cable's 3.5 mm plug into your scanner's
PHONE jack.
Page 7
7
2004/04/08, 16:49