Technical Specifications; Server Specifications And Features - Silicon Graphics Octane III User Manual

A.

Server Specifications and Features

007-5633-001
Appendix A

Technical Specifications

This appendix contains technical specification information about your system.
Table A-1 shows the physical specifications of the SGI Octane III deskside system.
Table A-1 SGI Octane III Enclosure Physical Specifications
System Features
Height
Width
Depth
Weight (full) maximum
Voltage range
Cycles per second
System Cooling
Phase required
Power supply
Hard drive bays
Power cable
PCIe slots
System server board dimensions
Specification
28.2 in. (71.6 cm)
12.5 in. (31.75 cm)
26.5 in. (67.3 cm)
178 lbs. (81 kg) approximate
100-127 VAC at 12 Amps (per supply)
200-240 VAC at 7 Amps (per supply)
50 or 60 Hz (single-phase AC)
Six enclosure fans on front and six on rear (12 total)
Single-phase
Two internal units
One or two per compute tray
Dual-pluggable cords
One low-profile PCI-Express slot per serverboard tray
6.5 in. (165 mm) x 16.4 in (417 mm).
One compute serverboard per Octane III tray
55