Clear Bmc System Event Log; Set Lan Configuration; Ip Address Configuration; Parameter Selector - Silicon Graphics Octane III User Manual

How To Change the Configuration Data

Clear BMC System Event Log

This feature is used to clear the BMC System Event Log. Caution: Any cleared information is
unrecoverable. Make absolutely sure that you no longer need any data stored in the log before
clearing the BMC Event Log.

Set LAN Configuration

Set this feature to configure the IPMI LAN adapter with a network address.
Channel Number - Enter the channel number for the SET LAN Configuration command. This is
initially set to [1]. Press "+" or "-" on your keyboard to change the Channel Number.
Channel Number Status -This feature returns the channel status for the Channel Number selected
above: "Channel Number is OK" or "Wrong Channel Number".

IP Address Configuration

Enter the IP address for this machine. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by dots should not exceed 255.

Parameter Selector

Use this feature to select the parameter of your IP Address configuration.
IP Address
The BIOS will automatically enter the IP address of this machine; however it may be over-ridden.
IP addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~ 9, A, B, C, D, E, F) separated by
dots. (i.e., 00.30.48.D0.D4.60).

Current IP Address in BMC

This item displays the current IP address used for your IPMI connection.

MAC Address Configuration

Enter the Mac address for this machine. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by dots should not exceed 255.
007-5633-001 47