Operating A Bluetooth ® Headset - Avaya 9670G User Manual

®
Setting up a Bluetooth
6. Every headset has a stored Passkey, but if yours is not processed, you may be
7. When the confirmation tone sounds, press Finish.
Operating a Bluetooth
The operation information provided here is generic and may not apply to all wireless headsets,
particularly those that are not Avaya branded. You should consult the information your headset
manufacturer provides for specific information.
Note:
Be sure your Bluetooth headset's battery is charged according to manufacturer instructions.
Basic headset operation is as follows:
™
64 Avaya one-X Deskphone Edition for 9670G IP Telephone User Guide
headset
device (headset) to select it from the list, then touch Activate. Alternately, you can
touch Add to add another device to the list and pair it with the phone as described in
the previous step.
asked to enter one using the dialpad. Avaya products use 0000 as the Passkey; for
non-Avaya headsets, consult your manufacturer's documentation. Passkey entry
can be up to 16 digits, but most devices use four digits. When complete, touch
Enter.
When pairing completes, the top line of the telephone display shows a Bluetooth
logo icon to indicate the wireless headset is active.
®
headset
• Press and hold the Power button for at least three seconds to turn the headset
on or off.
- The Bluetooth icon on the headset flashes blue when the headset is
on.
- If the battery is low, the Bluetooth icon flashes red. Recharge the
battery per the manufacturer's instructions
• To answer or end a call, press the headset's Call Control button.
• To place a call, press the headset's Call Control button. After you hear the
dial tone, start dialing.
• If you are using the telephone handset, transfer the call to your headset by
briefly pressing the Call Control button. To transfer a call from your headset
back to the handset, briefly press the Call Control button again, or if the
handset is still on-hook, simply pick up the handset.
®
May 2009