Unpacking And Inspecting The Media Gateways-Mcc1 - Avaya G650 Installing

Figure 1: Equipment packed with a single G650 Media Gateway
Figure notes:
1. ESD ground jack
2. 655A power supply
3. TN2312BP IP server interface (IPSI)
circuit pack
Unpacking and inspecting the media gateways—MCC1
!
DANGER:
Use lifting precautions. A fully loaded MCC1 Media Gateway weighs as much as
DANGER:
800 pounds (363 kilograms) and may be top heavy. Use caution to avoid injury.
To unpack and inspect the MCC1 Media Gateway:
1. Check the status of the SHOCKWATCH and/or TILTWATCH indicators on the container. If
the container has been shaken or tilted beyond specifications, the indicators are red,
indicating potential damage. Report any damage according to local shipping instructions.
!
DANGER:
Take care to avoid injury while cutting and removing the 2 metal bands.
DANGER:
2. Unpack the media gateway and remove all packing material.
3. Move the media gateway into its proper position.
4. Do not adjust the leveling feet at this time.
3 4
1
Power 1 2 3 4 5
FAN OR POWER FAIL
FAN AND POWER OK
AC INPUT
DC INPUT
ACTIVE RING
2
6 7 8 9 10 11 12 13 14
4. TN799DP CLAN (optional)
5. TN2302 IP media processor
(optional)
5
Power
FAN OR POWER FAIL
FAN AND POWER OK
AC INPUT
DC INPUT
ACTIVE RING
2
scdlff02 LAO 081203
Issue 2 January 2005 27