Figure 4: Setting the G650 Media Gateway carrier address ID
Mounting one G650 Media Gateway
Note:
In a multiple G650 Media Gateway configuration, put the G650s in the rack with
Note:
no vertical space between them. If the G650 Media Gateways are not mounted
adjacent with their fronts in the same vertical plane, the TDM/LAN cable(s)
cannot connect them.
Note:
Avaya recommends that the first G650 Media Gateway be installed in the lowest
Note:
position as carrier A (see
installed next to the media server rack
carriers B through E directly above carrier A.
To mount one G650 Media Gateway:
1. Remove the G650 Media Gateway door by opening and then lifting it straight up and off the
hinge pins.
!
WARNING:
When handling circuit packs or any components of the G650 Media Gateway,
WARNING:
always wear an authorized wrist ground strap connected to the ground connector
provided on the G650. Always store the circuit packs to protect them from
damage by electrostatic discharge.
2. To place the G650 Media Gateway in the medial position:
a. Remove the screws on the mounting brackets.
b. Move the brackets to a position midway on the G650 Media Gateway.
38 Installing the Avaya G650 Media Gateway
E
D
C
B
A
-48 VDC
-48 VDC
RETURN
Figure 2: G650 Media Gateway stack (A through E)
on page 35). This facilities mounting
E
D
C
B
A
swdlpdle LAO 072403