Pre-Installation Setup - Avaya G650 Installing

Maintenance Commands for Avaya Communication Manager 2.1, Media Gateways and
Servers (03-300191)—provides information on how to use command interfaces, command
syntax, and output from maintenance-related commands.
Maintenance Alarms for Avaya Communication Manager 2.1, Media Gateways and
Servers (03-300190)—provides information on how to use alarms, error codes, and tests
to diagnose and repair problems.
Maintenance Procedures for Avaya Communication Manager 2.1, Media Gateways and
Servers (03-300192)—provides information on how to troubleshoot and replace various
components.
The following information is included in this installation procedure:

Pre-installation setup

Installing the media gateways on page 23
Installing the G650 Media Gateway
Installing an MCC1 Media Gateway
Installing the G350 Media Gateway
Installing the G700 Media Gateway
Installing the main distribution frame
Connecting the media gateway to the main distribution frame
Connecting to the customer's network
Installing and wiring telephones and trunks
Testing the complete configuration
Pre-installation setup
The pre-installation team should have done the following tasks. If they were not all done, do not
continue with the installation.
Verify that the open, customer-supplied, EIA-310D (or equivalent) standard 19-inch
(48-centimeter) equipment racks are properly installed and solidly secured. Make sure that
the screws that come with the racks are there.
Verify that the rail kits, required to support the very heavy UPSs, are installed on the rack
or available for installation. For information on installing the rails, refer to the
documentation that comes with the rail kits.
Verify that the 19-inch (48-centimeter) EIA-310D open equipment rack(s) is (are))
grounded. See the job aid titled Approved Grounds (555-245-772).
on page 19
on page 30
on page 62
on page 105
on page 107
on page 113
on page 165
on page 227
on page 129
on page 169
Issue 2 January 2005 19