Installing Disk Drives; Installing Hdd, Optical Disk Drive, And Fdd; Fdd; Figure 2.7 Installing The Internal Hdd - Advantech ACP-2010MB User Manual

2u-high rackmount chassis for atx/microatx motherboard
Hide thumbs Also See for ACP-2010MB:
Table of Contents

Advertisement

2.4 Installing Disk Drives

The ACP-2010MB supports one 5.25" optical disk drive and three 3.5"
disk drives (one FDD and two internal HDD). Please refer to the follow-
ing instructions to install the various disk drives.
2.4.1

Installing HDD, Optical Disk Drive, and FDD

To install the internal HDD, 5.25" optical disk drive and the 3.5" FDD,
please follow these steps for installation:
1.
To install the 3.5" internal HDD, simply release the four screws on
top of the disk drive bracket.
2.
Insert the disk drive into the proper location in the bracket and
secure them with the screws provided. (see Figure 2.7)
3.
Return the bracket with the disk drive in the original position and
fasten it with the screws.
ACP-2010MB User Manual
Figure 2.7: Installing the internal HDD
12

Advertisement

Table of Contents
loading

Table of Contents