Table of Contents
Advertisement
d.
e.
f.
16.
CAUTION: The computer is provided with a battery-powered real-
time clock circuit. There is a danger of explosion if battery is incor-
rectly replaced. Replace only with same or equivalent type recom-
mended by the manufacture. Discard used batteries according to the
manufacturer's instructions.
17.
THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY
WITH APPROPRIATE SAFETY STANDARDS INCLUDING
IEC 60825.
18.
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
19.
CAUTION: Always completely disconnect the power cord from
your chassis whenever you work with the hardware. Do not make
connections while the power is on. Sensitive electronic components
can be damaged by sudden power surges.
20.
CAUTION: Always ground yourself to remove any static charge
before touching the motherboard, backplane, or add-on cards. Mod-
ern electronic devices are very sensitive to static electric charges.
As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components on a static-dissipative surface or in
a static-shielded bag when they are not in the chassis.
21.
CAUTION: Any unverified component could cause unexpected
damage. To ensure the correct installation, please always use the
components (ex. screws) provided with the accessory box.
ACP-2010MB User Manual
The equipment does not work well or you cannot get it to
work according to user manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
iv
Advertisement
Table of Contents
