Thermal Sensor; Figure 4.2 Thermal Sensor Location; Figure 4.3 Thermal Sensor Module - Advantech ACP-2010MB User Manual

2u-high rackmount chassis for atx/microatx motherboard

Hide thumbs Also See for ACP-2010MB:

Table of Contents

4.4 Thermal Sensor

The ACP-2010MB is configured with a thermal sensor on the backside of

the chassis. (see Figure 4.2)

Thermal sensor

Figure 4.2: Thermal sensor location

Refer to Figure 4.3 for a diagram of the thermal sensor module layout.

Figure 4.3: Thermal sensor module

Users can set up to 8 thermal sensors. The default sensor I.D. number is

1. User can refer to Table 4.13 to set the sensor I.D. number by adjusting

the switch, SW1, on the sensor module.

Chapter 4

Table of Contents