Product Labeling (examples)
Labels and Locations
Verification Label
Manufacturer/Country
Date of Production
Type+Serial Number
Warranty Label
If you are to perform service on a unit still under warranty, any warranty will be void if this label show signs of removal
attempts (re-gluing) or removed completely. This label is located on the back of the product and covers a key screw.
This is to aid service departments to determine if there has been any unauthorized service on a unit still under
warranty.
IND100199-2 Warning Label
This label indicates that "Special Service Rules Apply. See document IND100199-2". Service on this product should
not be performed without reviewing IND100199-2 first.
Quality Control (QC) Label
This label indicates that the unit is produced, tested and packed according to manufacturer's QA specifications.
It will include a Personal ID and signature by the personnell responsible for approving the unit in production, test and
warehouse departments.
Verification Label
This label indicates that the unit has been subject to a TEMPEST production test by NSM. Only a percentage of units
are subject to this test, so this label will not be found on all TEMPEST displays.
General
IND100077-105
Manufacturer:
Hatteland Display
NORWAY
HM 19T14 MMD-AAT-AOBA-000001
*Barcode type: CODE128 (used extensively world wide in shipping and packaging industries.
The symbology was formerly defined as ISO/IEC 15417:2007.)
Product Information
Manufacture:
Product:
Product type:
#
Jakob Hatteland Display
19 Inch
JH 19T01MMD-A1-831
NORWAY
TFT
Serial Number
100W
115VAC/50-60Hz
230VAC/50-60Hz
Product: 100W
115VAC/60Hz
19,0 Inch
230VAC/50Hz
TFT
Date:
20100225
Serial Number:
9
Warranty Label
IND100199-2 Warning Label
Quality Control Label
Product Description
Power Rating
Input Voltage
Barcode* (TYP+SNO)