Edge Ovens EDGE40 Installation & Operating Manual page 44

For domestic and standard export ovens
Table of Contents

Advertisement

Additional items not covered by this warranty:
1. Any item that is defective because of power surges, high or low voltage, high or low gas
pressure, inadequate gas volume, improper gas connections and improper maintenance.
2. Fuses
3. Conveyor belts
4. Normal maintenance and adjustments
1.11 This warranty excludes any obligation by MF&B for loss of product, down time or any other damage
or cost incurred at any time. IN NO EVENT SHALL MF&B BE LIABLE OR RESPONSIBLE FOR
HARM TO PROPERTY OR FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF USE, LOSS OF PROFITS, INTERRUPTION
OF BUSINESS, OTHER ECONOMIC LOSS, OR ANY OTHER DAMAGES WHATSOEVER IN
CONNECTION WITH THE WARRANTY SET FORTH ABOVE OR IMPLIED BY LAW, OR IN
CONNECTION WITH ANY OTHER LIABILITY, REGARDLESS OF THE FORM OF ACTION,
WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY, STATUTE OR OTHERWISE,
EVEN IF MF&B OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. The warranty and remedy set forth above are the sole warranty and exclusive
remedy. This exclusive remedy shall not be deemed to have failed of its essential purpose so long
as MF&B is willing and able to repair or replace defective parts in the manner described herein.
2.0 Customer Responsibility
2.1
The customer must provide for the installation of the unit in conformance with any and all
applicable codes, regulations, or standards. Customer must comply with all laws and other
requirements having force of law applicable at any time to the unit, its installation, or use.
2.2
The gas supply must be connected to the oven by a locally licensed plumber for the warranty to be
valid.
2.3
The Start-Up Checklist form must be filled out, signed and timely returned to MF&B to initiate and
validate the warranty.
2.4
Customer must present any claim under this warranty to MF&B.
2.5
Customer must notify MF&B within 10 calendar days of discovery of any claimed defect. Such
notice must include the serial number, model and location of the subject unit, along with a detailed
description of the problem.
2.6
MF&B reserves the right to, among other things, deny customer's warranty claim in the event
customer fails to perform any of its responsibilities under this warranty.
2.7
At MF&B's sole discretion, the customer may be required to return to MF&B an allegedly defective
part. The defective part must be received by MF&B within 15 business days after the request. If the
part is required to be returned a replacement part will be sent. Once the allegedly defective part is
received, it will be inspected for quality. If the part is then deemed by MF&B to be defective, the
customer will receive any further credit, reimbursement, or allowance due under the terms of this
warranty. To the extent MF&B agrees to reimburse any labor per the Flat Rate Warranty Schedule,
such reimbursement will also be issued at the same time. No credit, reimbursement or allowance
will be issued for returned parts that MF&B, in its discretion, determines not to be defective. In that
event, customer will be obligated to pay for the replacement part and will be solely responsible for
any labor.
2.8
All warranty parts are shipped using standard ground services. If the customer wishes to have the
part shipped, or wishes to ship a defective part pursuant to paragraph 2.7, by a faster method, the
customer will be responsible for all freight charges.
EDGE40 / EDGE60 Installation and Operating Manual
40
Rev 1.1 December 04, 2008

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Edge60

Table of Contents