Table of Contents
Advertisement
SAFETY INFORMATION
Improper installation, adjustment, alteration, servicing or
maintenance can result in property damage, injury, or death. Read
this entire manual and ensure that you thoroughly understand all
instructions before installing, operating, or servicing this equipment.
Do not store or use gasoline, cleaning solvents, or any other material
that may emit flammable vapors near this or any other appliance.
Oven installation, including electrical and natural gas connections, oven
placement, and ventilation must comply with all applicable national and local
codes. National and local codes supersede the recommendations, requirements,
and guidelines contained in the manual.
The purchaser of this equipment is required to prominently post instructions to
be followed should the user smell natural gas. This information shall be obtained
from the local natural gas supplier.
Installing any part(s) not provided by the Edge oven OEM shall void the warranty
and release the OEM from any and all liabilities.
Retain all shipping materials until you are certain that the oven has not been
damaged (either externally or internally) during shipment. Thoroughly inspect
the oven on receipt for both external and internal damage. It is solely the
customer's responsibility to report any shipping damage to the freight company.
The oven electrical wiring diagram is located inside the control compartment.
Keep the appliance free and clear of combustibles.
EDGE40 / EDGE60 Installation and Operating Manual
WARNING
WARNING
NOTICE
NOTICE
NOTICE
IMPORTANT
NOTICE
WARNING
ii
Rev 1.1 December 04, 2008
Hide quick links:
Advertisement
Table of Contents
