8. Insert the crumb pans into the rails underneath the belt frame. Solid crumb pans are
used in single or bottom oven belts. Perforated crumb pans are used in second and
third oven belts.(Figure 23)
Installation Instructions – Final Connections (Options #1 and #2)
Final installation of gas and electrical connections should be performed by an
authorized service company or a locally licensed electrician and plumber.
Gas pressure on this oven will need to be checked and set to specifications listed
in this manual.
Always check for leaks after making any gas supply piping connections or
performing any service on the oven.
EDGE40 / EDGE60 Installation and Operating Manual
Figure 23
WARNING
22
Rev 1.1 December 04, 2008