Table of Contents
Advertisement
Ovens can be shipped two ways:
1. Option #1: Ovens shipped structurally pre-assembled.
A. This is the way most oven manufacturers ship their ovens.
B. Ovens will be shipped via common carrier with lift-gate service.
C. The oven will require final assembly of non-structural components.
D. Special lifting equipment may be required for safe installation.
2. Option #2: Ovens shipped structurally unassembled.
A. This modular design method is new to the oven industry, and is used for all Edge
40 and 60 ovens. This design allows two-three people with basic mechanical
aptitude to safely assemble and install a single-, double-, or triple-stack of Edge
ovens using only a few simple hand tools.
B. The owner/installer will not require any special equipment for moving or installing
ovens shipped this way.
C. Ovens will be shipped via common carrier with lift-gate service.
D. Ovens will need to have some of the main structure (or body) assembled on site
by the installers. This includes bolting together the following components:
•
Oven Base
•
Oven Plenum Assembly
•
Oven Control Can Assembly
•
Oven Face
•
Oven Top
E. The oven will require final assembly of non-structural components.
EDGE40 / EDGE60 Installation and Operating Manual
7
Rev 1.1 December 04, 2008
Hide quick links:
Advertisement
Table of Contents
