Ensure that each finger assembly is reinstalled into the same location they were
removed from to avoid altering the baking characteristics of your oven.
Any maintenance or service performed inside of the control can assembly or
other than listed in this manual should be performed by an authorized service
company to avoid oven damage.
Following any maintenance, service work, or adjustments to the oven:
• Ensure that the ventilation system is working properly.
• Test for gas supply leaks.
• Visually inspect the oven to make sure it has been reassembled correctly.
EDGE40 / EDGE60 Installation and Operating Manual
IMPORTANT
WARNING
WARNING
38
Rev 1.1 December 04, 2008