Table of Contents
Advertisement
17. Set the control can into position, insert alignment pins, and secure it to the oven
using 1/4-20 x 3/4 inch bolts.(Figure 12)
18. Insert the thermocouples into the plenum bracket provided. This bracket is made of
spring steel and may be pinched together to allow thermocouples to pass thru both
holes.(Figure 13)
19. Reinstall the oven back removed earlier (being careful not to damage fan blade) and
secure it to the plenum with 3/8-16 x 3/4 inch bolts.
EDGE40 / EDGE60 Installation and Operating Manual
Figure 12
Figure 13
15
Rev 1.1 December 04, 2008
Hide quick links:
Advertisement
Table of Contents
