Customising Your Handset; General Points; Auto-Answer - Binatone e820 System User Manual

Digital cordless telephone with caller display and answering machine

Hide thumbs Also See for e820 System:

Table of Contents

Enlarged version

Color profile: Generic CMYK printer profile

Composite

Default screen

Customising your handset

You can customise the settings of your e820 handset,

using a menu which is shown on the handset's display.

Please note that:

If you don't press any button for about 25 seconds,

the handset will time out and the display will return

to standby mode.

When you confirm any setting you have made, you'll

hear a confirmation tone. If you make a mistake,

you'll hear a warning tone.

At the end of each set of steps, you can return the

handset to standby mode by either:

replacing the handset on the base unit

—

pressing and holding the HANG UP/C button

—

When a call comes in, you need to press any button to

answer it. Or you can set auto-answer — so, if the

handset is in place on the base unit, you simply lift it to

answer the call, without pressing any button.

Press the PROG button then 1 5

‡

Use the

0 for auto-answer off

1 for auto-answer on

Press the PHONE/OK button to confirm

E:\Binatone2004\e820\e820_UK_03.vp

15 November 2004 11:48:21

button to set:

Table of Contents