Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Setting up the answering machine
To record
1
If necessary, press and hold the ON–OFF/STOP
OGM2
button to switch the machine on
2
Briefly press the ON–OFF/STOP button so
that the machine says:
3
Press and hold the OGM (REWIND) button
until you hear a 'beep'
4
Record your OGM into the base unit's
microphone
5
As soon as you have finished speaking, press
the ON–OFF/STOP button to stop recording
u The machine plays back your OGM. If you
want to change it, simply record it again.
To set the
The machine can answer calls after two to nine rings. If
you don't set a number, it will answer after five rings.
number of
rings
If you check your messages remotely, you can set Toll
Saver — the machine will answer after two rings if
there are new messages; after five rings if there are no
new messages. So, if it hasn't answered after two rings,
you can hang up to save the cost of the call.
1
Press and hold the RING button (on the
underside of the base unit) for about
2 seconds until you hear "Set rings" .
Then release the button
2
Briefly press and release the FORWARD
(MEMO) or REWIND (OGM) button
repeatedly to change the number of rings
3
Press the RING button again to confirm the
number of rings you have set
You can check the number of rings at any time
by briefly pressing the RING button.
28
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:20
"Please call later"
Advertisement
Table of Contents
