Switching On And Off; To Switch The Handset On And Off; To Lock The Keypad - Binatone e820 System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen

Switching on and off

To switch the To switch the handset off and save battery
handset on power:
and off
Press the HANG UP/C button and hold it for
3 seconds until the display goes blank
To switch the handset back on:
Briefly press the HANG UP/C button
To lock the

To lock the keypad:

keypad
Press the HANG UP/C button and hold it for
1 second until the 'key' symbol and a group
of dashes appear on the display
To unlock the keypad:
Press the HANG UP/C button and hold it for
1 second until the 'key' symbol disappears
from the display
Or simply replace the handset on the base
unit or charger pod
Notes When the handset is switched off, it can't be used for
making calls, including emergency calls.
When the handset is switched off, it won't ring for
incoming calls, but the base unit will still ring. To
answer a call when the handset is switched off, you
need to switch it back on. Remember that it may take
a few moments for the handset to re-establish a radio
link with the base unit.
When you don't need to use the handset (for
example, overnight or when you go out), replace it
on the base unit or charger pod, to keep the batteries
charged
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:16
9