Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Troubleshooting
The answering machine
"The machine
The machine's memory may be full. You need to delete
won't record
enough recorded messages to free at least one minute's
messages."
recording time. Or you can delete all recorded
messages to make room for new ones (see page 32).
Make sure the machine is switched on — the
ANSWER/MESSAGE light on the base unit should be on.
Make sure you have not selected OGM2 — with OGM2
selected, callers cannot leave messages (see page 27).
"Remote
Make sure you're using the correct remote security
operation
code.
doesn't work."
Check that you're using a suitable tone-dialling phone.
Some cordless or mobile phones don't generate contin-
uous tones and so are not ideal for remote operation.
Don't leave more than 10 seconds between key presses;
otherwise, your call will be cut off.
If the machine pauses during playback and you hear a
tone, press any key within 10 seconds to continue;
otherwise, your call will be cut off.
Indirect Network
"The Indirect
You must subscribe to an alternative network
Network feature
provider before you can use this feature.
isn't working."
If you have more than one registered handset, you need
to turn the feature on for each one individually, as well
as setting the network access code on the base unit.
When making a call, you must dial the number (or
select the number from memory, LNR memory or Caller
Display memory) before you press the PHONE/OK
button for an outside line.
50
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:23
Advertisement
Table of Contents
