Handset Registration; To Register A New Handset Or To Re; Register An Existing Handset; To Register Your Handset To A New Base Unit - Binatone e820 System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen

Handset registration

The handset(s) supplied with your base unit are already
registered; you shouldn't need to re-register them. But
if you've bought extra handsets separately, you will
need to register them. Each handset can be registered
to up to four base units, numbered 1 to 4.
1
To register a Press and hold the HANDSET LOCATOR
new handset button on the base unit until you hear
or to re- Registration tone (slow 'beeps')
register an
You now have 30 seconds in which to register
existing
the handset.
handset
2 On the handset, press the PROG button
then key in 1 6 followed by 1 (the base
unit number)
3
Key in 0000 (the base unit's PIN
code)
4
Press the PHONE/OK button
u The display shows the handset numbers
which are still free on the base unit.
5
(Optional) Key in a handset number
If you don't key in a number at this point, the
handset will be registered with the lowest free
number.
u The handset beeps to confirm registration.
To register Follow the steps above, but key in a new base unit
your handset
number (2, 3 or 4) sfter 16 at step 2.
to a new base
unit
22
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:17