Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
1
To set
Press the PROG button then 2 4 1
additional
'local' dialling
codes
2
Key in the first dialling code (up to 6 digits)
3
Press the PHONE/OK button to confirm
4
Press 4 2
5
Key in the second dialling code (up to 6 digits)
6
Press the PHONE/OK button to confirm
To turn
You need to do this on each handset.
Indirect
1
Press the PROG button then 1 4
Network on
and off
‡
2
Use the
0 for Indirect Network off
1 for Indirect Network on
3
Press the PHONE/OK button to confirm
When you make a call, the handset will dial the network
access code when you dial a number beginning with 0,
except when it's to one of the 'local' codes you have set.
When a call is routed via Indirect Network,
on the display.
Note — for Indirect Network to work, you must dial
!
the phone number (or select it from memory, LNR
memory or Caller Display memory) before you press
the PHONE/OK button for an outside line.
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:22
Indirect Network
ˆ
or
buttons to set:
LC
is shown
45
Advertisement
Table of Contents
