To De-Register A Handset; To Select A Base Unit - Binatone e820 System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
To de-register You may need to do this in order to replace a
a handset faulty handset.
1
Press the PROG button then 2 6
u The display shows the numbers of all
handsets registered to the base unit.
2 Key in the number of the handset to be
de-registered
u The display flashes, and the handset is
de-registered.
To select a If your handset is registered to more than one
base unit base unit, it will automatically select the one
with which it can best set up a radio link
(usually the nearest one). Or you can select a
base unit manually.
You don't need this function if you have
only one base unit.
1 Press the PROG button then 1 7
‡
2 Use the
Base units are numbered 1 to 4. If you select 0,
your handset will automatically select the base
unit that gives the strongest connection.
3
Press the PHONE/OK button to confirm
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:18
Handset registration
ˆ
or buttons to select a base unit
23