What The Symbols Mean - Binatone e820 System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
Symbols on the display
The handset's
number (1 if you
have a single system,
1, 2 or 3 if you have
a Twin or Triple
system)
The duration of each call is shown on the display from 20 seconds
after you press the PHONE button for a line, until 5 seconds after
you end the call.

What the symbols mean

Signal This shows the strength of the signal between the handset and
base unit. It flashes while the handset is trying to establish a
level
radio link to the base unit If this symbol flashes while you're
on a call, move closer to the base unit
This appears when you missed incoming calls (even if you do
New call
not use Caller Display).
This flashes while your handset is ringing for an intercom call,
Intercom
and comes on steadily when the call's connected.
call
Memory/ This comes on when you're storing numbers in memory, and
store when you're making calls to stored numbers.
Indirect
This appears when the handset is dialling a non-local number
network
via an alternative provider's
This appears when you're using Last Number Redial.
Redialling
Caller This appears when you're checking, or dialling from, the list of
Caller Display records.
Display
Keypad
This appears when the keypad is locked, or when you're trying
locked
to dial a barred number.
When this shows 'nearly empty' (
Battery
the base unit or charger pod as soon as possible, to charge the
charge
batteries. While the batteries are being charged, this symbol
level
blinks.
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:11
The time is shown if you've
set the handset's clock
The base unit's number (1,
unless you have registered
your handset to more than
one base unit)
.
.
network.
), put the handset onto
1