Installing Your Phone; Connecting The Base Station; Installing And Charging The Rechargeable Batteries In The Main Eclipse Handset - Binatone Eclipse Plus User Manual

2

INSTALLING YOUR PHONE

2.1 Connecting the Base Station

1) Plug the mains power cable and telephone
cord
into the base station.
2) Plug the power adapter into a 100 - 240Vac,
50 - 60Hz mains power socket, and the
telephone line cord
into a telephone line socket.
Warning:
Always use the cables provided in the box.
Use only the supplied adaptor. Using other power
cables may damage the unit.
Note:
Place the base unit within easy reach of the mains power socket.
Never try to lengthen the mains power cable.
The base station needs mains power for normal operation, and the
cordless handsets will not work without it.
2.2 Installing and Charging the Rechargeable Batteries in the Main
Eclipse Handset
1) Insert the 2 supplied batteries into the battery compartment,
observing the correct polarity (see markings inside battery
compartment).
Warning: Use only the supplied NiMH rechargeable
batteries.
2) Place the back cover over the back of the
handset and press down until it clicks into place.
3) Place the handset on the base and charge for 15
hours before using the handset for the first time.
•
The handset will give a double beep when it
is properly placed on the base and the
battery charging indicator on the base lights
up to indicate charging.
Note: The handset may become warm when the
batteries are being charged or during prolonged periods of use. This is
normal and does not indicate a fault.
To the
telephone line
socket
9
To the mains
power socket
line