Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Troubleshooting
The e820 must be serviced by trained engineers.
!
NEVER attempt any repairs or adjustments yourself
— you could make the problem worse and invalidate
the Warranty.
ALWAYS check
you have followed all the steps listed on pages 6 and
first that:
7 to install and set up your e820
all connectors are firmly inserted in their sockets
mains power is switched on at the socket
the handset's batteries are correctly and securely
installed, and are not run down
Everyday use
"I cannot make
If the handset's display is blank, it may be switched off.
or answer calls."
Press the HANG UP/C button to switch it back on.
Check that the base unit's mains power adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you're using the telephone line cable that
was supplied with your e820. Other telephone line
cables might not work.
Move the handset closer to the base unit.
Check the Battery Level symbol on the display. If it is
low, replace the handset on the base unit or charger
pod to recharge the batteries.
Switch off power at the mains socket, wait for a few
seconds and then switch back on. This may solve the
problem.
46
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:22
Advertisement
Table of Contents
