Registration Of A New Handset - Binatone Ultra XD1220 Instruction Manual

displayed on the LCD [2].
5. Press OK [8] button.
6. Choose the required language using
7. Press OK [8] button to confirm your choice and to exit to the previous
menu option.
8. Press CANCEL [10] button to exit this menu option.

Registration of a new handset

This function allows you to register a new handset at the main unit (base).
You can register up to 5 handsets that support GAP function at the main unit.
Each handset can be registered at 4 main units (bases). If you want to register
one more handset at the main unit that already has 5 handsets registered,
then you have to delete one of the previously registered handsets first.
Note:
1. The handset included in the delivery set is already registered at
the main unit. This function is required in case you need to
register another handset or you accidentally deleted the
active handset registration.
2. Before beginning registration, make sure the new handset is
fully charged and is located near the main unit (base) in
front of you.
3. You can register any handset from any providers if they support
GAP function. However if you do register a handset from
another provider, some additional functions of the handset
may not work.
At the main unit (base):
Press and hold • [16] button until you hear a sound signal and the
operation LED [15] will blink. This means that the main unit switched into the
registration mode. The main unit will remain in this mode for 90 seconds
switching into the normal mode after that time expiration.
At a handset:
1. Press OK [8] button, "PHONE BOOK" message will be displayed
on the LCD [2].
2. Press [7] button several times until "REGISTRATION" message will be
displayed on the LCD [2].
[6] and [7] buttons.
10