Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
PBX use
"The Recall
You may need to press and hold the R button for a
function doesn't
couple of seconds, rather than pressing it briefly. Try
this and see if it works.
seem to work."
"Last Number
When you first make a call, press the Redial/CDS/P
Redial and/or
button for a pause between the outside line access
memory dialling
code (e.g. 9) and the telephone number. You should
don't work on
later be able to redial the number.
a PBX."
When storing numbers in memory, you can include the
outside line access code (e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press the
Redial/CDS/P button for a pause between the access
code and the number.
You can also set up your e820 so that it automatically
inserts a 2-second pause after you dial the outside line
access code, as follows:
1
Press the PROG button then 2 5 0
2
Key in the line access code (up to four
digits)
3
Press the PHONE/OK button to confirm
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:23
Troubleshooting
51
Advertisement
Table of Contents
