Basic Telephone Operations; Switching The Handset On/Off; To Lock/Unlock The Keypad; Set Time And Date - Binatone iDECT C5i System User Manual

Switching the handset on/off

To switch on
B
If the display is blank, press HANG-UP
To switch off
B
In standby mode, press and hold HANG-UP
seconds.
** You can switch the handset off to save on battery power.
Note: When the handset is OFF, it cannot be used to make calls, including emergency
calls. It will not ring when there is an incoming call. To answer or make a call, you will
need to switch it back on. It may take some time for the handset to re-establish a radio
link with the base unit.

To lock/unlock the keypad

To lock
*
Press and hold
To unlock
*
Press and hold
simply replace the handset on the charging cradle.

Set time and date

If you have subscribed to Caller Display service, the time and date will
be set automatically when you receive a call.
m
1 Press MENU/OK
.
2 Press UP
m
3 Press MENU/OK
m
4 Enter the time (in 24-hour mode), the date and the month, then press
MENU/OK
iDECT Help Line (for UK only): 0845 345 9677 (Local Call rate)

Basic Telephone Operations

*
The display shows
*
m
u
or DOWN
m
The display shows
m
to confirm.
A confirmation beep is played.
for 2 seconds until you hear a beep tone.
Keys Locked and the
for 2 seconds until you hear a beep tone, or
to enter the main menu.
d
to select Set
to select.
00:00 01/01, with the first number flashing.
B
.
B
for more than 2
icon.
Date/Time.
5