Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Switching on and off
To switch the
To switch the handset off and save battery
handset on
power:
and off
Press the HANG UP/C button and hold it for
3 seconds until the display goes blank
To switch the handset back on:
Briefly press the HANG UP/C button
To lock the
To lock the keypad:
keypad
Press the HANG UP/C button and hold it for
1 second until the 'key' symbol and a group
of dashes appear on the display
To unlock the keypad:
Press the HANG UP/C button and hold it for
1 second until the 'key' symbol disappears
from the display
Or simply replace the handset on the base
unit or charger pod
Notes
When the handset is switched off, it can't be used for
making calls, including emergency calls.
When the handset is switched off, it won't ring for
incoming calls, but the base unit will still ring. To
answer a call when the handset is switched off, you
need to switch it back on. Remember that it may take
a few moments for the handset to re-establish a radio
link with the base unit.
When you don't need to use the handset (for
example, overnight or when you go out), replace it
on the base unit or charger pod, to keep the batteries
charged
8
E:\Binatone2004\Lifestyle\Lifestyle_100\Lifestyle-100_UK_01.vp
14 April 2004 15:14:06
Making and answering calls
To make a call
1
Key in the telephone number
If you make a mistake, press the HANG UP/C
button to clear digits one by one from the display.
2
Press the PHONE/OK button
(You can dial the number after you press the
PHONE/OK button to get Dial tone if you
prefer, but you won't be able to correct any
mistakes if you do it this way.)
If you want to use the Indirect Network
feature, turn to page 33 for more information.
To answer a
When there's an incoming call, call or the phone
call
number (if you subscribe to Caller Display: see page 15)
flashes on the display; and the base unit and handset ring.
Press any button to answer the call
To end a call
Press the HANG UP/C button so that the
IN USE light on the base unit goes out
Or simply replace the handset on the base
unit or charger pod
Earpiece
During a call, to adjust the volume in the earpiece:
volume
‡
ˆ
Press the
or
There are three volume levels, shown by bars
on the right-hand side of the display. After you
end your call, the earpiece volume will stay at
the level you have set.
Binatone Help Line: 0845 345 9677
(Local Call rate)
button
9
Advertisement
Table of Contents
