Pci-X Extender Board Option - HP PROLIANT ML330 G6 User Manual

Extend the server from the rack (on page 21).
o
Remove the access panel (on page 21).
3.
Remove the expansion slot cover
4.
Install the expansion board, and then press firmly to seat the board in the connector.
5.
Close the slot cover retainer.
6.
Connect any required internal cables to the expansion board. See the documentation that ships with
7.
the expansion board.
Install the access panel (on page 22).
8.
Do one of the following:
9.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Connect any required external cables.
10.
Power up the server (on page 20).
11.

PCI-X extender board option

Power down the server (on page 20).
1.
Disconnect power cords from the power source.
2.
Disconnect all power cords from the server.
3.
Do one of the following:
4.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 21).
o
Remove the access panel (on page 21).
5.
Remove the air baffle (on page 22).
6.
("Removing the expansion slot
("Open or remove the tower
cover" on page 63).
bezel" on page 20).
Hardware options installation 65