Redundant Fan Assembly Option - HP PROLIANT ML330 G6 User Manual

Remove the power supply blank.
2.
WARNING:
AC power cords to uninstalled power supplies.
Slide the power supply into the power supply bay until the release/lock lever clicks, securing the
3.
power supply.
Connect the power cord to the power supply.
4.
Using the retaining clip shipped with the server, secure the power cord to the power supply handle.
5.
Securing the cord will ensure enough slack.
Connect the power cord to the AC power source.
6.
Be sure that the power supply LED is illuminated green
7.

Redundant fan assembly option

To install the component:
Power down the server (on page 20).
1.
Do one of the following:
2.
To reduce the risk of electric shock or damage to the equipment, do not connect
("Rear panel LEDs and buttons" on page 10).
Hardware options installation 50