Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 21).
o
Remove the access panel (on page 21).
3.
Remove the air baffle (on page 22).
4.
Remove the fan from fan bay 1.5.
5.
Install the removed fan in fan bay 2.
6.
Install a fan from the option kit in fan bay 1.
7.
Locate the fan 1 connector
8.
Remove the jumper from the fan 1 connector.
9.
Connect the fan cables to the system board
10.
Fan 1 cable to fan 1 connector
a.
Fan 2 cable to fan 2 connector
b.
Install the air baffle.
11.
("Open or remove the tower
("System board
components" on page 11).
("System board
bezel" on page 20).
components" on page 11):
Hardware options installation 51