Identifying Guide Screws; Sata Optical Drive Option - HP PROLIANT ML330 G6 User Manual

Identifying guide screws

When installing drives in the removable media bay, guide screws must be installed so that the drives
align correctly in the drive cage. HP has provided extra guide screws, located behind the side access
panel. Depending on the option, use 5.25 M3 metric screws or HD 6-32 shipping screws. The metric
screws supplied by HP are black.

SATA optical drive option

For clarity, the following illustrations include option cabling only.
CAUTION:
unless all bays are populated with either a component or a blank.
To install the component:
Power down the server (on page 20).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 21).
o
Remove the access panel (on page 21).
3.
Remove the applicable media bay blank
4.
Identify the guide screws
5.
To prevent improper cooling and thermal damage, do not operate the server
("Identifying guide
("Open or remove the tower
("Remove the media bay
screws" on page 58).
bezel" on page 20).
blank" on page 23).
Hardware options installation 58