Redundant Fan Assembly Option - HP ProLiant ML350 G6 User Manual

Install the silver shipping screw into the full-height device.
4.

Redundant fan assembly option

To install the component:
Power down the server (on page 24).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 26).
3.
Remove the fan blank from fan bay 4
4.
Install the fan in fan bay 4.
5.
Connect the fan cable to the system board
6.
("Open or remove the tower
("Remove a fan blank" on page 29).
("System board components" on page 11).
bezel" on page 25).
Hardware options installation 65