Configuration Information - Factory Integrated Models; Step 1: Base Configuration - HP PROLIANT DL580 Quickspecs

Hp server user manual

Hide thumbs Also See for PROLIANT DL580:

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid

configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales

representative for information on CTO product offerings and requirements.

NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must

start with a CTO Chassis.

NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.

NOTE: FIO indicates that this option only available as a Factory Installable Option.

Models

Step 2: Choose Required Options (only one of the following from each list unless

otherwise noted)

Processors

Base Memory

HP ProLiant DL580 G5 Highly Serviceable Rack Chassis

HP ProLiant DL580 G5 Highly Serviceable Tower Chassis

Factory Integrated Model ships with:

Two embedded NC373i Multifunction Gigabit Server Adapters

Eight standard PCI-Express slots

HP Smart Array P400i Controller

Two Hot Plug Power Supplies with two high-line IEC power cords

Six (6) Redundant Hot Plug Fans

SFF SAS Drive Cage

Integrated Lights-Out 2 (iLO2) Standard Management

Tower or Rack (4U), 7-inch

HP DL580G5 2.93 2x4M QC X7350 Kit, FIO