Harman PC45 Installation & Operating Manual page 9

Fig. 11
Fig. 12
9 pC 45 Corn/pellet Stove
venting
#3 Installing into an existing chimney
This method provides excellent venting for normal operation.
This method also provides natural draft in the event of a
power failure. If the chimney condition is questionable you
may want to install a liner as in method #6. Check with your
local regulations, some municipalities require a complete
liner.
Chimney must be of a type suitable for solid fuel
burning.
Chimney and connector must be maintained in good
condition and kept clean.
#4 Installing into an existing fireplace chimney
This method provides excellent venting for normal operation.
This method also provides natural draft in the event of a
power failure.
The damper area must be sealed with a steel plate. Kaowool,
mineral wool or an equivalent non-combustible insulation is
recommended to be installed on top of the sealing plate to
reduce the possibility of condensation. The connector pipe
should extend through the smoke chamber to the base or into
the first flue tile. A cap should be installed on the chimney to
keep out rain. If the chimney condition is questionable you
may want to install a liner all the way to the top as in method
#5. Check with your local regulations, some municipalities
require a complete liner.
Chimney must be of a type suitable for solid fuel burning.
Chimney and connector must be maintained in good
condition and kept clean.
3-90-02686R29_05/14