Harman P61A Installation & Operating Manual

Harman P61A Installation & Operating Manual

Freestanding pellet stove

Advertisement

NOTICE: SAVE THESE INSTRUCTIONS
Model(s):
P61A Freestanding Pellet Stove
PLEASE R EAD THIS ENTIR E MANUAL BEF OR E Y OU INSTALL AND USE Y OUR NEW
F OLLOW
INSTR UCTIONS MAY R ESULT IN PR OPER TY DAMAG E, BODILY INJ UR Y , OR EV EN DEATH.
F OR USE IN THE U.S. AND CANADA. SUITABLE F OR INSTALLATION IN MOBILE HOMES.
IF THIS HAR MAN STOV E IS NOT PR OPER LY INSTALLED, A HOUSE F IR E MAY R ESULT. F OR Y OUR SAF ETY , F OLLOW
INSTALLATION DIR ECTIONS. DO NOT USE MAK ESHIF T COMPR OMISES.
CONTACT LOCAL BUILDING
R EQ UIR EMENTS IN Y OUR AR EA.
CONTACT Y OUR
LOCAL AUTHOR ITY (SUCH AS MUNICIPAL BUILDING
PR EV ENTION BUR EAU, ETC.) TO DETER MINE THE NEED F OR A PER MIT.
CETTE G UIDE D' UTILISATION EST DISPONIBLE EN F R ANCAIS. CHEZ V OTR E CONCESSIONNAIR E DE HAR MAN®.
Installation & Operating Manual
SAF ETY NOTICE
OR F IR E OF F ICIALS ABOUT R ESTR ICTIONS AND INSTALLATION INSPECTION
SAV E THESE INSTR UCTIONS.
Hot glass will cause burns.
o not touch glass until it is cooled
• NE ER allow children to touch glass
eep children away
• CARE ULLY SUPER ISE children in same room as
stove.
• Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other
amma e mater a
eep clothing, furniture, draperies and other flammable
materials away.
To obtain a
rench translation of this manual, please
contact your dealer or visit www.harmanstoves.com
Pour obtenir une traduction fran aise de ce manuel, s il
vous pla t contacter votre revendeur ou visitez www.
harmanstoves.com
Contact your local dealer with questions on installation,
operation or service.
DEPAR TMENT, F IR E DEPAR TMENT, F IR E
!
WARNING
HOT SUR F ACES!
Glass and other surfaces are hot during
operation and cool down.
NOTE
R OOM HEATER . F AILUR E TO
3 -9 0 -0 5 8 2 2 R 2 8 _ 0 8 /1 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P61A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Harman P61A

  • Page 1 Hot glass will cause burns. Model(s): • o not touch glass until it is cooled P61A Freestanding Pellet Stove • NE ER allow children to touch glass • eep children away • CARE ULLY SUPER ISE children in same room as stove.
  • Page 2 7 mm min 9"(228mm) 13”(330mm) 3 -9 0 -0 5 8 2 2 R 2 8 _ 0 8 /1 3 P 1A Pellet Stove...
  • Page 3: Table Of Contents

    Table of Contents Safety Information Installation enting  ESP Control Automatic Operation anual Operation Low raft oltage Ad ustment ivision of Hearth Home Technologies aintenance ountain House Road Halifax, PA 170 2 Troubleshooting uel Specifications Listed by: OMNI-Test Laboratories, Inc. ixing Corn with Pellets Report #: 1 5-S-22- , 1 5-S-22b- .2 eets requirements of: AST...
  • Page 4 IMPOR TANT NOTES W AR NING DO NOT INSTALL A F LUE DAMPER IN THE EX HAUST V ENTING SY STEM OF THIS UNIT. MOBILE/ MANUF ACTUR ED HOME STANDAR DS DO NOT ALLO W INSTALLATION IN R OOMS DESI G NATED F OR SLEEPING .
  • Page 5 Assembly and Installation Unpacking The P 1A is bolted (1 x 1 hex head bolts) to the skid to prevent movement during shipping. To free the stove from the skid you must remove the hold- down bolts in the rear of the pedestal base. R emoving rear cover panels The rear cover panels are secured to the stove with three bolts each.
  • Page 6: Installation

    Installation Installing Alternate floor protector Place the stove on a noncombustible floor or on a floor protector d im e n s io n m a y b e u s e d as long as they satisfy the that extends a minimum of inches to the front, (measured from 9"(228mm)- measurement requirements shown below.
  • Page 7: Installation

    V enting R eq uirements for Terminating the V enting H. A vent must not be installed within feet ( 0 cm) above a gas meter regulator assembly when measured from the WARNING: enting terminals must not be recessed into a horizontal center-line of the regulator.
  • Page 8: Enting

    NOTE: Simpson DuraV ent PelletV ent Pro Harman Adapter Part # 3 PV P-ADHB and PelletV ent Pro Harman Adapter Increaser Part # 3 PV P-X 4 ADHB are highly recommended to be installed on the starter collar to insure a proper pipe connection to the unit.
  • Page 9 . Inlet cover part number 1-10-085 2 should be used to keep birds, rodents, etc.out of the pipe unless the Harman wall passthrough is being used. Direct V ent W all Passthrough...
  • Page 10 V enting # 1 Preferred method This method provides excellent venting for normal operation and allows the stove to be installed closest to the wall. Two inches from the wall is safe however, four inches allows better access to remove the rear panel. The vertical portion of the vent should be three to five feet high.
  • Page 11 V enting # 4 Installing into an ex isting chimney This method provides excellent venting for normal operation. This method also provides natural draft in the event of a power failure. If the chimney condition is questionable you may want to install a liner as in method #7. In some places in the US and Canada it is required that the vent pipe extend all the way to the top of the chimney.
  • Page 12 V enting n ta n nt an e t n firep ace c mney This method provides excellent venting for normal operation. This method also provides natural draft in the event of a power failure. In some places in the US and Canada it is required that the vent pipe extend all the way to the top of the chimney.
  • Page 13 V enting Storm collar Flashing min. min. min. PL vent manufacturer's firestop spacer and support No insulation or n mum ue ent c nfi urat n other combustible It is recommended that outside materials are air be installed with this venting allowed within configuration to reduce smoke 3"...
  • Page 14: Esp Control

    Requires special DDM Room Temp Mode, Stove Temp Fahrenheit. It also allows you to adjust the stove monitor supplied to Harman Mode, or OFF. Also allows you to temperature while in Stove Temp Mode using the inner Dealers exclusively.
  • Page 15 Secondly if O NOT CONNECT TO ANY AIR ISTRIBUTION you are using the Harman battery back up system, the anual OR SYSTE . setting will prevent the stove from turning off and on during...
  • Page 16 AUTOMATIC IG NITION/ OPER ATION Stove Temperature Mode Shut Down Procedure In the Stove Temperature ode and with the igniter toggle The best way to shut down the stove is to simply let it switch in the Auto position, the stove will light automatically run out of pellets.
  • Page 17 AUTOMATIC STAR T UP Starting F irst F ire Igniter Switch to " AUTO" (up position) ake sure the unit is plugged into a 120 AC, 0 H electrical source. The power light should be the only light lit. NOTICE: Be sure there is no unburned fuel or other F ig.
  • Page 18: Automatic Operation

    MANUAL IG NITION/ OPER ATION The P 1A Pellet Stove is capable of manual operation. This also allows the operator to manually control operation during an emergency (i.e. igniter failure, when using a 502H battery backup, as opposed to the 512H, or when using certain generators.) The unit can be switched between AUTO and ANUAL at any time during operation.
  • Page 19 MANUAL STAR T UP Starting F irst F ire Igniter Switch to " MANUAL" (down position) F ig. 2 0 ake sure the unit is plugged into a 120 AC, 0 H electrical source. The power light should be the only light lit. NOTICE: Be sure there is no unburned fuel or other combustibles in the ash pan prior to lighting.
  • Page 20 Low Draft V oltage Adj ustment Combustion Motor Speed Control Low draft only set point. The small straight screwdriver slot is plastic; therefore, the unit can be adjusted while in operation. Draft Meter bolt hole location The draft test hole is under the left rear corner of the firebox.
  • Page 21: Aintenance

    Call the fire department, and be sure everyone is out of the residence. Before re-using the appliance, have it, and the venting system thoroughly inspected and replace any damaged components. The glass in your Harman stove is a special 5mm ceramic glass. •...
  • Page 22 Maintenance Scraping the burn pot: Whenever adding fuel to the hopper, take the time and scrape the grate surface of the burnpot, using the scraper tool provided. This can be done while a fire is burning. Wearing heat resistant gloves, open the firebox door. Scrape any accumulated ashes from in front of the fire, into the ash pan.
  • Page 23 Maintenance . Remove the ash pan and properly dispose of the ashes. 7. Remove combustion blower cover by turning the blower cover latch vertical, see ig.2 . Sliding the cover out of the slot on the left. This will expose the combustion blower wheel and flue outlet, ig.27.
  • Page 24 Maintenance - Burn Pot Burn Pot Cleaning and Maintenance 1. Scrape the top holed surface and sides of the burn pot.( ig ) It is not necessary to completely remove all material from the burn pot. The excess will be pushed out during the next use.
  • Page 25 Maintenance - Cleaning the F eeder Body Pellet fines may accumulate in the feeder body over a period of time therefore, a yearly inspection and cleaning of this area must be performed. To clean out fines: 5/16" Hex Head 1. Remove the rear cover panels. Screws (2 on 5/16"...
  • Page 26: Troubleshooting

    Trouble-Shooting STOV E DOES NOT F EED SMOK E IS V ISIBLE COMING OUT OF V ENT 1. No fuel in hopper. 1. Air-fuel ratio is too rich. irebox draft may be too low for sensing switch in feeder a. eed rate too high. circuit to operate.
  • Page 27 ue Spec ficat n F uel and F uel Storage Size Pellet fuel quality can fluctuate from manufacturer to • Pellets are either 1 inch or 5 1 inch ( -8mm) in manufacturer, and even from bag to bag. diameter Hearth Home Technologies recommends using only •...
  • Page 28 Addendum for Burning Corn and Pellet Fuel Mixture Harman pellet burning, free-standing stoves and inserts have been tested to ASTM E1509 for burning shelled corn in a mixture with wood pellets. The listing approves up to a 50% corn and 50% pellet mixture. Di erent mixtures of corn will have distinctively di erent burn characteristics depending upon moisture content and variety.
  • Page 29 Contact your dealer if you have questions about UPS compatibility with your appliance. Harman® Surefire 512H Battery Back-up The 512H connects to a 12 volt deep cycle battery that will run your appliance for up to eight (8) hours. It includes a trickle charge feature that keeps your battery charged when power is available.
  • Page 30: Options

    Options Side Heat Shields Direct V ent W all Passthrough K it Side heat shields are available to reduce the clearance to You may choose to use the optional irect ent Wall combustible materials. Passthrough it (part #1-00- 77077) which incorporates Part #1-00-08 venting passthrough and outside air into one component.
  • Page 31: Wiring Iagram

    W iring Diagram HARMAN P43/P61A/P68 PELLET STOVE WIRING DIAGRAM MALE/FEMALE CONNECTIONS BROWN WHITE GREEN WIRE IS GROUND REMOTE SENSOR PORTS 6 AMP GLASS FUSE BONDED TO STOVE BODY CONTROL GREEN BOARD WHITE BLUE ESP PROBE TWISTED WIRE MALE/FEMALE CONNECTIONS LOW PRESSURE SWITCH N.O.
  • Page 32: Limited Lifetime Warranty

    hearth & home technologies liMited liFetiMe warrantY Hearth & Home Technologies, on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. warrantY coverage: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation within two years following the date of original purchase, that the HHT appliance will be free from defects in materials and workmanship at the time of manufacture. After installation, if covered compo- nents manufactured by HHT are found to be defective in materials or workmanship during the applicable warranty period, HHT will, at its option, repair or replace the covered components. HHT, at its own discretion, may fully discharge all of its obligations under such warranties by replacing the product itself or refunding the verified purchase price of the product itself. The maximum amount recoverable under this warranty is limited to the purchase price of the product. This warranty is subject to conditions, exclusions and limitations as described below. warrantY Period: Warranty coverage begins on the date of original purchase. In the case of new home construction, warranty coverage begins on the date of first occupancy of the dwelling or six months after the sale of the product by an independent, authorized HHT dealer/ distributor, whichever occurs earlier. The warranty shall commence no later than 24 months following the date of product shipment from HHT, regardless of the installation or occupancy date. The warranty period for parts and labor for covered components is produced in the following table. The term “Limited Lifetime” in the table below is defined as: 20 years from the beginning date of warranty coverage for gas appliances, and 10 years from the beginning date of warranty coverage for wood, pellet, and coal appliances. These time periods reflect the minimum expected useful lives of the designated components under normal operating conditions. Warranty Period HHT Manufactured Appliances and Venting Components Covered Parts Labor Wood Pellet Coal Electric Venting Wood All parts and material except as covered by Conditions, 1 Year...
  • Page 33: Warranty Conditions

    warrantY conditions: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of HHT authorized dealers is available on the HHT branded websites. • This warranty is only valid while the HHT appliance remains at the site of original installation. • This warranty is only valid in the country in which the HHT authorized dealer or distributor that sold the appliance resides. • Contact your installing dealer for warranty service. If the installing dealer is unable to provide necessary parts, contact the nearest HHT authorized dealer or supplier. Additional service fees may apply if you are seeking warranty service from a dealer other than the dealer from whom you originally purchased the product. • Check with your dealer in advance for any costs to you when arranging a warranty call. Travel and shipping charges for parts are not covered by this warranty. warrantY eXclusions: This warranty does not cover the following: • Changes in surface finishes as a result of normal use. As a heating appliance, some changes in color of interior and exterior surface finishes may occur. This is not a flaw and is not covered under warranty. • Damage to printed, plated, or enameled surfaces caused by fingerprints, accidents, misuse, scratches, melted items, or other external sources and residues left on the plated surfaces from the use of abrasive cleaners or polishes. • Repair or replacement of parts that are subject to normal wear and tear during the warranty period. These parts include: paint, wood, pellet and coal gaskets, firebricks, grates, flame guides, batteries and the discoloration of glass. • Minor expansion, contraction, or movement of certain parts causing noise. These conditions are normal and com- plaints related to this noise are not covered by this warranty. • Damages resulting from: (1) failure to install, operate, or maintain the appliance in accordance with the installation instructions, operating instructions, and listing agent identification label furnished with the appliance; (2) failure to install the appliance in accordance with local building codes; (3) shipping or improper handling; (4) improper opera- tion, abuse, misuse, continued operation with damaged, corroded or failed components, accident, or improperly/ incorrectly performed repairs; (5) environmental conditions, inadequate ventilation, negative pressure, or drafting caused by tightly sealed constructions, insufficient make-up air supply, or handling devices such as exhaust fans or forced air furnaces or other such causes; (6) use of fuels other than those specified in the operating instructions; (7) installation or use of components not supplied with the appliance or any other components not expressly authorized and approved by HHT; (8) modification of the appliance not expressly authorized and approved by HHT in writing;...
  • Page 34: Service Parts

    P6 1 A Pellet Service Parts Steel Pellet Stove Beginning Manufacturing Date: N/ A Ending Manufacturing Date: Active 1 -9 0 -0 5 8 0 1 -1 (Black) R etired Units 1 -9 0 -0 5 8 0 1 -2 (Charcoal) (J une 2 0 1 1 ) 1 -9 0 -0 5 8 0 1 -5 (Honey G lo) (J une 2 0 0 9 ) 1 -9 0 -0 5 8 0 1 -3 (G oldenfi re) (J une 2 0 1 1 ) 1 -9 0 -0 5 8 0 1 -1 0 (Moj ave R ed) (J an 2 0 1 0 )
  • Page 35 P6 1 A Pellet Service Parts Beginning Manufacturing Date: N/ A Ending Manufacturing Date: Active # 2 Pre Serial Number 0 0 8 0 8 5 0 9 2 F eeder Assembly 2 .2 2 .3 2 .1 2 .4 2 .5 2 .6 2 .1 2...
  • Page 36 P6 1 A Pellet Service Parts Beginning Manufacturing Date: N/ A Ending Manufacturing Date: Active # 3 Post Serial Number 0 0 8 0 8 5 8 0 3 F eeder Assembly 3 .1 3 .1 2 3 .1 5 3 .1 6 3 .1 4 3 .2...
  • Page 37 P6 1 A Pellet Service Parts Beginning Manufacturing Date: N/ A Ending Manufacturing Date: Active I PORTANT: THIS IS ATE IN OR ATION. Parts must be ordered from a dealer or distributor. Stocked Hearth and Home Technologies does not sell directly to consumers. Provide model number and serial number when requesting service parts from your dealer or distributor.
  • Page 38 P6 1 A Pellet Service Parts Beginning Manufacturing Date: N/ A Ending Manufacturing Date: Active I PORTANT: THIS IS ATE IN OR ATION. Parts must be ordered from a dealer or distributor. Stocked Hearth and Home Technologies does not sell directly to consumers. Provide model number and serial number when requesting service parts from your dealer or distributor.
  • Page 39 Service & Maintenance Log Date Of Service Performed By Description Of Service P 6 1 A P ellet S tove 3 -9 0 -0 5 8 2 2 R 2 8 _ 0 8 /1 3...
  • Page 40 Service & Maintenance Log Date Of Service Performed By Description Of Service 3 -9 0 -0 5 8 2 2 R 2 8 _ 0 8 /1 3 P 6 1 A P ellet S tove...
  • Page 41 Notes P 6 1 A P ellet S tove 3 -9 0 -0 5 8 2 2 R 2 8 _ 0 8 /1 3...
  • Page 42 At Harman, we build each product to a standard, not a price. This powerful heating appliance boasts uncompromising attention to detail and helps preserve our planet by using environmentally responsible fuels. (Signature of Boxer) Your premium quality hearth product designed and assembled by the experienced and skilled members at Harman in Halifax, PA, USA.

Table of Contents