Vertical SBX IP 320 User Manual page 19

Installing Your DECT Cordless Telephone
Direct Wall Mounting
If you do not have a standard wall plate, you can mount your telephone directly on a wall.
Before mounting your telephone, consider the following:
Select a location away from electrical cables, pipes, or other items behind the
mounting location that could be hazardous when placing screws into the wall.
Make sure wall material is capable of supporting the weight of the Base Unit.
Use #10 screws with anchoring devices suitable for the wall material where the Base
Unit will be placed.
To mount the base unit on a wall:
1. Insert two mounting screws 3 15/16 inches apart.
Allow about 3/16 of an inch between the wall and
screw heads for mounting the telephone.
2. Plug and secure the AC Adapter cord by following
steps 2 and 3 of the "Standard Wall Plate Mounting".
3. Plug one end of the telephone line cord into the LINE
jack on the Base Unit. Then place the telephone cord
inside the molded channel on the bottom of the Wall
Mount stand.
4. Place the Base Unit on the posts of the wall screws
and push down until it's firmly seated.
5. Plug the other end of the short telephone cord into a
telephone wall jack.
6. Plug the AC Adapter into a standard 120V AC wall
outlet.
Release 2.0
DECT Cordless Telephone User Guide
8
October 2010