Wall Mounting - Vertical SBX IP 320 User Manual

Installing Your DECT Cordless Telephone

Wall Mounting

You can mount the DECT Cordless Telephone on a standard wall plate or directly on a
wall.
Standard Wall Plate Mounting
Your DECT Cordless Telephone is designed to be mounted on a standard wall plate.
To attach the wall mount stand to the Base Unit:
1. Slide the Wall Mount stand into the notches at the
top of the Base Unit, push the Wall Mount stand
down and snap it into place.
2. Plug the AC Adapter into the Base Unit as
previously described.
3. Place the AC Adapter cord inside the molded
channel of the Wall Mount stand.
4. Plug one end of the short telephone cord into the
LINE jack on the Base Unit. Then place the
telephone cord inside the molded channel on the
bottom of the Wall Mount stand.
5. Plug the other end of the short telephone cord into
the modular wall jack.
6. Place the Base Unit on the posts of the wall plate
and push down until it's firmly seated.
7. Plug the AC Adapter into a standard 120V AC wall
outlet.
Do not use an outlet controlled by a wall
NOTE --
switch. Turning the wall switch off will also turn the
base unit off.
Release 2.0
DECT Cordless Telephone User Guide
7
October 2010