Tone/Pulse Dialling; Voice Mail - Direct Transfer - Toshiba Strata IPT User Manual

Tone/Pulse Dialling

With some older Central Offices, you may have to make calls on outside lines programmed for
rotary dial pulses. This feature enables you, while on these lines, to switch to tone dial to access
remote equipment (such as an answering machine) requiring touchtones.
Note:
With ISDN calls, when Tone Dial Select is pressed, all of the digits entered after that point will be sent with
touchtones.
To change Tone Dialling
1. Access an outside line.
2. Dial a phone number.
3. While on the call, press
dial pulses, access the outside line and dial the phone number like any other call described in this
user guide.
The Tone LED lights steady red and you are able to send touchtones with your dial pad. The feature
is cancelled when the call is completed.
Voice Mail – Direct Transfer
The Strata CIX Office/CTX enables you to transfer a call directly to a voice mailbox without first
ringing that person's phone.
To transfer a call directly to Voice Mail (VM)
1. While on a call, press
#407
2. Enter . You hear entry tone.
3. Enter the VM mailbox number (usually the same as the extension number), then press
call transfers immediately and your extension becomes idle.
STRATA IPT/DKT FEATUREPHONE USER GUIDE
Tone Dial Select
. Although the outside line is programmed for rotary
Cnf/Trn
. You hear feature dial tone.
Toshiba Business Communications Division
#
. The
73 of 124