Voluntary Account Codes (Verified/Non-Verified) 4 - Toshiba Strata IPT User Manual

STRATA IPT/DKT FEATUREPHONE USER GUIDE
Voluntary Account Codes (Verified/Non-Verified)
Voluntary Account Codes are optional. They can be entered during a call and are used for tracking
selected calls using Station Message Detail Report (SMDR) call detail recording option.
If the system is set for Verified Account Codes, station users must enter a specific code when
entering the Voluntary Account Code(s) or the code is not validated for the SMDR call report. This
does not affect the call.
There are two ways to dial using a Voluntary Account Code:
`To dial using the Account Code button
Account Code
1. After accessing a CO line, press the button. LCD featurephones prompt you to
"ENTER ACCOUNT CODE NOW."
2. Enter the account code digits. The LCD prompt disappears upon entry of the first account code
digit. After the account code is entered, the time indicator is restored in the LCD.
3. If your station is set for Verified Account Codes, you hear confirmation tone when the code is
valid. If the code is invalid, you hear two short tones.
4. Enter the Account Code. Your conversation is not interrupted.
To enter an Account Code using access codes
It's a good idea to warn the other party that you will be disconnected momentarily when you
Note
enter the access code. Once the code is entered, you will be connected again.
Cnf/Trn Cnf/Trn
1. After accessing a CO line, press . Once you press , your call is interrupted; you
and the other party cannot hear each other. You will hear feature dial tone.
#46
2. Dial . LCD featurephones prompt you to "ENTER ACCOUNT CODE NOW."
3. Enter the account code digits. The prompt disappears upon entry of the first account code digit.
After the account code is entered, the connection is restored and the LCD shows the time.
44 of 124
Toshiba Business Communications Division